Optical Electrical Optical Converter

Previous 2 / 8 Next

Optical Electrical Optical Converter Ethernet Access Device Networking Accessories Network Communication Solutions Optical Electrical Optical Converter Ethernet Access Device Networking Accessories Network Communication Solutions
Quantity
Add Quotation


Description

This is an Optical-Electrical-Optical (OEO) signal converter, which has two SFP sockets. It can convert two optical digital signals of SFP modules, which maybe different wavelength, different distance or different mode (single mode/multi mode fiber) and same speed at 100M Hz or 1G Hz auto detection. It allows the operator to maintain the Optical-Electrical-Optical with IEEE 802.3ah Link Layer OAM and TS-1000 OAM at CO or CPE mode.

Feature

  • Protocol transparent 3R fiber media transponder/repeater (Re-amplification, Re-shaping and Re-clocking)
  • Data rates up to 1G
  • Extend transmission distance from fiber
  • Perform optical repeater function
  • Support SFP DDM (Digital Diagnostics Monitoring)
  • Comply with IEEE 802.1Q Tag VLAN
  • Support Q-in-Q function
  • Maximum Frame size 9K bytes
  • Ethernet bandwidth Control
  • LED indicators for ease of network diagnostic
  • Prompt indication on network failure
  • Firmware upgrade via HTTP
  • Built-in IP-based WEB GUI configuration and maintenance
  • Centralized install with iEAC-16 via web or SNMP management

Specification
Model
  • ENTU 763S/GO Stand alone Ethernet repeater
  • ENTU 763C/GO Card type Ethernet repeater
Network Interface
  • Connector type: SFP (MINI-GBIC)
  • SFP type: 100Base-FX SFP modules
  • 1000Base-X SFP modules
  • Support SFP DDM (Digital Diagnostic Monitoring)
  • Temperature, Voltage, Current, Tx Power, Rx Power
  • For detailed wavelength and distance of SFP modules, please refer to SFP Transceivers datasheet
User Interface
  • Connector type: SFP (MINI-GBIC)
  • SFP type: 100Base-FX SFP modules
  • 1000Base-X SFP modules
Ethernet feature
  • Link Status
  • Management IP: static IP or DHCP
  • Ethernet bandwidth control
  • Complies with IEEE 802.1q Tag VLAN (including Q-in-Q)
  • Jumbo frame to 9k bytes
Management & OAM Functions
  • Configuration via craft port VT-100 and WEB GUI
  • Console: RJ45 connector (RS232C)
  • HTTP firmware upgrade
  • RMON counter
  • Front panel test button for easy loop healthy testing
  • Reset button back to factory default
  • Support IEEE 802.3ah Link Layer OAM(network side)

Auto discovery
Link monitoring
Remote loopback test
Remote fault detection

  • Link Fault Reflection
  • Dying Gasp
  • Critical Event
  • Support TS-1000 OAM(network side)

Loopback test
Reset remote device
Get remote device information
Remote port setting

LED Indicators
  • PWR, WAN LNK, CO, TST, TP, RF, LAN LNK
Power Requirement (Stand alone)
  • AC/DC, DC/DC external power adapter (12V, 0.5A)
  • Power consumption: 3.3W
Dimension
  • 87(W) x 172(D) x 24(H) mm
Operating Environment
  • Operation Temperature: 0 o C ~ 50 o C
  • Storage Temperature: -20 o C ~ 70 o C
  • Humidity: 90%, non-condensing
Application

Please leave your enquiry here, we will reply as soon as possible.
Name*  
Company Name  
Product Interested  
Quantity  
Email*  
Contact No.*  
Messages*  
   

Switch to Mobile Version
Subscribe Newsletter
1
Hello! Thanks for visiting my site. Please press Start button to Contact with Admin :)

Start