ALTAAS Topologies Sdn Bhd
Unit D-8-05, Oasis Square (Building Capital 4)
No. 2, Jalan PJU1A/7A,
Ara Damansara,
47301 Petaling Jaya,
Selangor, Malaysia.
TAINET’s Comet 165x/164x series, is so called Ethernet Access Devices (EAD), Ethernet Media Data Converter (MDC), Ethernet Multiplexer (EMUX) or Ethernet DSL modem, which takes advantage of the latest G.SHDSL.bis standard, is a mini-terminal enabling the transport of traffic from Ethernet, E1, Nx64k Data and RS-232 interface with line rate 15M/30Mbps over 2/4 wires G.SHDSL.bis link.
Feature
Point to point Ethernet and TDM MUX data extender over multiple G.SHDSL.bis copper lines
Compliant with ITU-T G.991.2 standard, TC-PAM 16/32/64/128 line coding and IEEE 802.3ah EFM 2Base-TL bonding.
1 or 2 pairs G.SHDSL.bis with 5.7Mbps per pair
Support extension rate up to 15.2Mbps over a single pair of copper
Support various interfaces include Fast Ethernet, E1, RS-232 EIA-530, X.21 and V.35
DIP switch can be used to quickly configure 8 sets of default profile
Automatic line rate selection with Line Probe enabled
Flexible installation by console, Telnet, WEB GUI, SNMP or DIP-Switch
Front panel OAM loopback button test function, easy to perform loop diagnostics
Remote software upgrade for field-deployed units via TFTP or HTTP/HTTPS
Support security-link feature and DSL line protection for data transmission
Built-in lightning protection circuit
Ethernet switching and bridging with VLAN prioritization and QoS
Specification
Line Interface – G.SHDSL.bis
Type: 2 or 4-wire
Standard: ITU-T G.991.2, ETSI 101 524
Bonding protocol: IEEE 802.3ah EFM 2Base-TL
Line rate: n x 64Kbps, n=3~239 (2w), 6~478 (4w),
Connector: 1 x RJ-45
Line coding: TC-PAM 16/32/64/128
Impedance: 135 W
DTE Interface – Ethernet
Ethernet type: 10/100BaseT
Connector: 2 x RJ-45
Supports 802.3x flow control
Auto-MDI/MDIX detection
Auto-negotiation for speed and duplex
Support Layer 2 functions
Ethernet L2 function
Supports 802.1d transparent bridge function
Supports Bridge filter function based on source MAC addresses
Scalable per port bandwidth control (Step = 64K, up to 100M)
2K MAC learning address
Ethernet packet length up to 2000 bytes
Supports 802.3x flow control
Provides 802.1q VLAN tagging
Supports 802.1p QoS facility
DTE Interface – E1
Data Rate: 2.048Mbps
Connector: RJ-45 for balanced E1 120 W
(Optional external convert cable for unbalanced 75 W)
Line coding: HDB3
Framing: Framed /Framed+CRC /Unframed
Compliance: ITU-T G.703 and G.704
Jitter Performance: compliant with ITU-T G.823
Support BERT test mode
DTE Interface – Nx64k Data
Data Rate: n x 64Kbps, up to 4.6Mbps
Connector: 2 x DB-25 Female with optional adapter cable (V35/X21/RS449/RS530/RS530A)
DTE and DCE clock settings
Full duplex
Synchronous Data Rates
DTE Interface – V.24(RS-232)
2 X DB-25, Support RS-232, RS-422 and RS-485 (optional adapter cable)
Data Rates: Asynchronous-300/600/1200/2400/4800/9600/19200/ 38400/48000/56000/57600/115200 bps