ALTAAS Topologies Sdn Bhd
Unit D-8-05, Oasis Square (Building Capital 4)
No. 2, Jalan PJU1A/7A,
Ara Damansara,
47301 Petaling Jaya,
Selangor, Malaysia.

+6016-396 6868

+60163966868

Message Us

THOR Type 1+2 AC Surge Protector (TRS30B+C limp 8ka)

1 / 2

Quantity

Add Quotation

THOR Type 1+2 AC Surge Protection Device (TRS30B+C limp 8ka)

Type 1 + Type 2 AC surge protector
Iimp : 4.5 kA on 10/350µs impulse
MOV technology
In: 30kA / Imax: 60kA
Pluggable module for each phase
Remote signaling (option)
IEC 61643-11 / EN 61643-11 compliant

The working principle of surge protection device:

The surge arresters commonly defined as SPDs (Surge Protection Devices), are devices designed to protect electric systems and equipment against transient and impulse overvoltages such as those caused by lightning strikes and by electric switching.

Their function is to divert the discharge or impulse current generated by an overvoltage to earth/ground, thereby protecting the equipment downstream.

SPDs are installed in parallel with the electric line to be protected. At the mains rated voltage, they are comparable to an open circuit and have a high impedance at their ends.

In the presence of an overvoltage, this impedance falls to very low values, closing the circuit to earth/ground.

Once the overvoltage has ended, their impedance rises again rapidly to the initial value (very high), returning to open loop conditions.

The Type1+ 2 SPD is the main protection system for all low voltage electrical installations. Installed in each electrical switchboard, it prevents the spread of overvoltages in the electrical installations and protects the loads.

Type1+ 2 surge protective devices (SPDs) are designed to protect electric installations and sensitive equipment against indirect surges and ensuring a low protection level (Up).

Type 2 surge protective devices provide effective protection against these dynamic disturbance variables. Whether in an industrial environment or in a residential building, type 2 protection ensures basic protection for your installations and devices.

The B+C series type 1+2 SPDs are available have a discharge capacity of 10kA, 20KA, 40KA, 60KA in single-phase or 3-phase configuration and with various voltages in order to protect any type of power supply system.

THOR Type 1+2 DIN-rail SPD features are offering quick thermal response and perfect cut-off function and providing fast and reliable protection for various power supply systems.And its capacity to safely discharge current with 8/20 μs waveform.

Built with window fault indication and optional remote alarm contact, it can monitor the operating status of the SPD itself.

Please leave your enquiry here, we will reply as soon as possible.
Name*
Company Name
Product Interested
Quantity
Email*
Contact No.*
Attachment		*only support gif, jpeg, jpg, png, pdf
Messages*

THOR Type 1+2 AC Surge Protector (TRS30B+C limp 8ka)

THOR Type 1+2 AC Surge Protection Device (TRS30B+C limp 8ka)

Quick Links

Recent Post

Contact